FrigoBlock

Produced in conformity with chilly, cold and freezer storage room conditions. Meets the multi - purpose cooling requirements. Designed specially on project base. Manufactured in compliance with European Union norms and marked CE.

Technical Specifications

• It has semi hermetic, scroll or screw type compressor.

• Be manufactured with air cooled or water cooled condenser.

• All equipments are delivered together with control instruments as being ready to assembly.

• It is delivered with positive pressure by pumping nitrogen to inside and outside unit.

• It has electrostatic painted galvanized steel frame.

• Compressors are activated fractionally

• Wide product capacity range.

• Condensers and evaporators are choosen in compliance with unit capacity.

Advantages

•Production in compliance with world standards

• Highly efficient

• High quality and reliable equipment

• Design ensures easy installation and assembly

• Compliance with various mounting options

• Cabin enables to ease of maintenance

• Wide product range

• Manufacturing with accordance to HACCP standards

• Evaporator design minimize to loss product moisture

• Reduced number of defrosts and increased defrost intervals for energy saving

• Longer cooling periods without defrost for saving in overall plant operating costs

Equipments in units

* It can differ according to unit model

• Phase protection relay(High/Low)

• Thermal / Magnetic circuit breaker

• Contactor (in three-phase models)

• Crankcase heater

• Copper tube aluminium fin condenser

• Liquid receiver, Liquid flow control solenoid

• Dryer

• Sight glass

• Service / Maintenance valve (on the liquid line)

• Pressure switch (Low / High)

• Gas charge valve

• Check valve

• Oil filter, Oil separator, Oil tank, Oil regulator

• Invertor

• Electronic fan speed controller (in frost series)

Manufactured in compliance with Europe Union norms and marked CE

Technical Specifications

•It has Semi hermetic, scroll and screw type compressor

• It is manufactured with air cooled or water cooled condenser

• They are designed for working with ammonia and freon systems.

• Units are manufactured with Shell&Tube evaporators and also if required it can be produced with plate heat exchangers

• Water tank, pump and other hydronic equipments can be offered with hydronic kit optionally.

• Delivered with positive pressure by pumping nitrogen to inside and outside unit.

• All equipments are delivered together with control instruments are delivered as ready to assembly

• It has remote control panel.

• It has electrostatic painted galvanized steel frame.

• It can be manufactured with single or double circuits

Advantages

• Production in compliance with world standards

• Highly efficient

• Low noise level compressor compared to equivalents

• High quality and reliable equipment

• Design ensures easy installation and assembly

• Compliance with various mounting options

• Wide product range

• Manufacturing with accordance to HACCP standards

Equipments in units

* It can differ according to unit model

•Phase protection relay(High/Low)

• Thermal / Magnetic circuit breaker

• Contactor (in three-phase models)

• Crankcase heater

• Copper tube aluminium fin condenser

• Liquid receiver

• Dryer

• Sight glass

• Liquid flow control solenoid

• Service / Maintenance valve (on the liquid line)

• Pressure switch (Low / High)

• Gas charge valve

• Check valve

• Oil filter, Oil separator, Oil tank, Oil regulator

• Electronic fan speed controller (in frost series)

• Freezing thermostat, flow switch

Produced in conformity with cold and freezer room conditions manufactured in compliance with European Union norms and marked CE

Technical Specifications

•With semi-hermetic and scroll compressor and air cooled condenser.

• It has remote control panel.

• It has robust housing according to ambient conditions.

• It is delivered with positive pressure by pumping nitrogen to inside and outside unit.

• All equipments are delivered together with control instruments as being ready to assembly.

• It has electrostatic painted galvanized steel cabinet.

• High efficiency evaporator design according to unit capacity.

Advantages

• Production in compliance with world standards

• Highly efficient

• Low noise level outdoor unit compared to equivalents

• High quality and reliable equipment

• Design ensures easy installation and assembly

• Compliance with various mounting options

• Cabin enables to ease of maintenance

• Wide product range

• Manufacturing with accordance to HACCP standards

• Evaporator design minimize to loss product moisture

• Reduced number of defrosts and increased defrost intervals for energy saving

• Longer cooling periods without defrost for saving in overall plant operating costs

Equipments in units

* It can differ according to unit model

• Phase protection relay (High/Low)

• Thermal / Magnetic circuit breaker

• Contactor (in three-phase models)

• Crankcase heater

• Copper tube aluminium fin condenser

• Liquid receiver, Suction line accumulator

• Dryer

• Sight glass

• Liquid flow control solenoid

• Service / Maintenance valve (on the liquid line)

• Pressure switch (Low/ High)

• Gas charge valve

• Check valve

• Oil filter, Oil separator

• Sound Insulation

• Electronic fan speed controller (in frost series)

Produced in conformity with cold and freezer room conditions. Manufactured in compliance with European Union norms and marked CE.

Technical Specifications

• It has hermetic compressor and air cooled condenser

• Device is compact type and delivered as all control equipments assembled

• It has hot gas defrost system

• It has electrostatic painted galvanized steel cabinet.

Advantages

• Production in compliance with world standards

• Highly efficient

• Low noise level compressor compared to equivalents

• High quality and reliable equipment

• Compliance with various mounting options

• Cabin ensures to ease of maintenance

• Wide product range

• Manufacturing with accordance to HACCP standards

• Reduced number of defrosts and increased defrost intervals for energy saving

• Longer cooling periods without defrost for saving in overall plant operating costs

• First investment expenses are lower than other options

Equipments in units

* It can differ according to unit model

•Phase protection relay(High/Low)

• Thermal / Magnetic circuit breaker

• Contactor (in three-phase models)

• Copper tube aluminium fin condenser

• Liquid receiver

• Dryer

• Sight glass

• Liquid flow control solenoid

• Service / Maintenance valve (on the liquid line)

• Pressure switch (Low / High)

• Gas charge valve

• Check valve

• Electronic fan speed controller (in frost series)

Produced in conformity with cold and freezer room conditions manufactured in compliance with European Union norms and marked CE

Technical Specifications

• It is with hermetic and scroll compressor and air cooled condenser.

• It has remote control panel.

• It has robust housing according to ambient conditions.

• It’s delivered with positive pressure by pumping nitrogen to inside and outside unit.

• All equipments are delivered together with control instruments as being ready to assembly.

• It has electrostatic painted galvanized steel cabinet.

• High efficiency evaporator design according to unit capacity.

Advantages

• Production in compliance with world standards

• Highly efficient

• Low noise level outdoor unit compared to equivalents

• High quality and reliable equipment

• Design ensures easy installation and assembly

• Compliance with various mounting options

• Wide product range

• Manufacturing with accordance to HACCP standards

• Evaporator design minimize to loss product moisture

• Reduced number of defrosts and increased defrost intervals for energy saving

• Longer cooling periods without defrost for saving in overall plant operating costs

Equipments in units

* It can differ according to unit model

• Phase protection relay (High/Low)

• Thermal / Magnetic circuit breaker

• Contactor( in three-phase models)

• Crankcase heater

• Copper tube aluminium fin condenser

• Liquid receiver

• Dryer

• Sight glass

• Liquid flow control solenoid

• Service / Maintenance valve (on the liquid line)

• Pressure switch(Low/ High)

• Gas charge valve

• Check valve

• Oil filter, Oil separator

• Sound insulation

• Electronic fan speed controller (in frost series)