SK Brazing Company has introduced a Water Tank Vision and Welding Machine to compliment their Full Production Line for Hot Water Solar Panel Manufacturing. This new machine has the capability of welding both of the end caps of water storage tanks to the main water tank body using either a TIG, MIG, Plasma, CO2 or Laser welding process.
The introduction of this machine enables manufacturers to increase their water tank production while maximizing water tank quality by:
Insuring tight dimensional control
Minimizing heat distortion
Providing uniform welding quality with precise size control
These are typical quality concerns associated with manual welding operations. Water tank assemblies can either be loaded onto the machine with or without the end caps spot welded onto the main tank body. If the assemblies are already spot welded, the machine will start the visioning process by rotating the assemblies on a lathe like fixturing system to check the entire circumference of the joint between the end caps and the tank body for tight dimensional tolerances through the use of vision and laser scanning. The laser sensors check the height variation of the joints to be welded and the vision sensors check the width variation of the joints to be welded and all of these measurements are displayed on the machine's Vision Scanning Monitor. The machine will not weld if the tolerances exceed the maximum allowable.
If the tank assemblies are loaded onto the machine without the end caps having been spot welded to the tank body, the machine would rotate the assemblies to perform this task prior to visioning. The spot welding of the tank body to the end caps prior to final welding is a critical requirement in order to minimize heat deformation during the final weld process.
Once visioning of the spot welded assemblies is completed and there is confirmation that the tolerances are within acceptable limits, the machine will then proceed with final welding the end caps to the body of the water tanks using the customer's preferred welding process. Typically, this machine holds 5mm as the maximum tolerance in visioning with a cycle time of 2~3 minutes per 280~350mmtanks for visioning and welding.
The Water Tank Vision and Welding Machine design is flexible to accommodate a variety of water tank sizes and can also weld a variety of tank materials like stainless steel, aluminum or steel etc.. SK Brazing Company also furnishes machines to do the linear welding of the water tank body as well as the spot welding of the end caps(if not done on the visioning machine) with strong engineering, joint design, and metallurgical support services to assist customers in meeting their hot water solar panel manufacturing needs.
Leider gibt es für diesen Aussteller kein deutsches Firmenprofil.
In 1987, SK Brazing was formed as a division of EAC (A USA/Korea Company) located in seoul, korea and the current SK Brazing was bought by the present owner, in 1993.
Today, SK Brazing is recognized as one of the world's leading company in the production of brazing, soldering & welding systems and providing metal joining technology.
We offer a complete range of brazing and soldering services including materials, automation and technical expertise.From simple shuttle machines to complex, fully automated systems incorporating robotics, material handling, etc.. SK Brazing has designed and built automation solutions for most industrial applications, and we pride ourselves on the craftsmanship & quality found in our equipment.
SK Brazing can also offer a full complementary range of products and services including - alloy selection, flux selection, brazing methods, automation methods & an education service, all supported by our renowned technical expertise. Our literature will show that we have our own factories complete with brazing research & education facility, situated in Bucheon and Siheung city and therefore easily accessible to customers from all over the world.
Although we have a very broad technology range we have tended to specialize in the air conditioning and automotive industries (especially radiators and heaters). Brazing and soldering machines are purpose built to customers' requirement and specification which is why our manufacturing capacity is sometimes limited. You, the customers are involved in all stages of development through manufacturing, testing and inspection of your machine.