In the NO FROST type refrigerators, the humidity in the cabinet is collected as ice on their special evaporators, and then it is defrosted automaticly and discharged to the outside in the form of water at certain intervals. The defrosting is done via various types of heater elements, and the sequence is controlled by special control elements attached to the evaporators.
The NF Evaporators could be in different designs each having their own advantages and disadvantages. The one manufactured in Konveyor is the one known as the Brazeway type, with the name of the U.S. company who developed it many years ago.
The range and features of the no-frost evaporators can be described as follows:
Aluminum tube, Ø 8x0.8 or Ø 8x0.7 mm, is supplied from European manufacturers as internally pressurized coils.
Fins are stamped by progressive dies out of 0.17 or 0.18 mm thick aluminum sheets.
Copper inlet and outlet adaptors are connected by the fluxless joint or by special hard-brazing methods.
The product range: L= 250-600 mm, H= 190-323 mm, p (Fin spacing)= 5 mm or the multiples of 5 mm
All evaporators are tested against leak by heium sniffers and they meet the related internal cleanliness standards.
Depending on the customer requirements, the evaporators can be assembled with accumulators, suction tubes, heating elements, controls and supplied as ready to use in the assembly lines.
They are packed in cardboard boxes and shipped on wooden pallets for long distance deliveries.
Leider gibt es für diesen Aussteller kein deutsches Firmenprofil.
Konveyor A.S. was established in 1979 as a manufacturer of chain-forged overhead conveyor systems. In 1981, we began manufacturing aluminium-forged burner caps for gas cookers for a leading Turkish appliance manufacturer. In the 1980's the Turkish appliance industry grew significantly and the manufacturing demand, KONVEYOR transformed gradually from a supplier-subcontractor to supplier of the appliance industry. With the shift of emphasis, we mounted our last conveyor system in 1991.
In 1992 Konveyor established a 300 sqm (rented) plant in Eskisehir, for supplying the suction tube assemblies to the biggest refrigerator plant of Turkey in the same city basis.
In 1994, Konveyor exhibited in Domotechnica, and has been participating in the Domotechnica, Confotec or IKK Fairs every year to-date.
In 1996, we moved our Eskisehir Plant to its own 3000 sqm building in Eskisehir's Industrial District.
In 1997, we transferred our Istanbul plant to our own 5000 sqm factory building in Tuzla Industrial District on the Asian side of Istanbul.
Towards the end of 1998, Komveyor gained DIN ISO 9002 Certification from RWTÜV, Germany, association.
In 1999, the Eskisehir plant was enlarged to 6000 sqm and the investment for manufacturing the WOT evaporators was started. In the same year, we invested to produce fabricated copper tubes and assemblies for home air conditioner units in Tuzla (Istanbul) plant.
Towards the end of 2000, the WOT investment in Eskisehir was completed successfully. With the success achieved, and with the push of customers, the WOT capacity was doubled towards the end od the years 2001 and also 2002. In 2004 the capacity was enlarged again and the Eskisehir plant has reached to 12 000 sqm production area.
In 2005, Konveyor has started export aimed production activities in the new factory in the DESPAS free zone of Tuzla with the name Konveyor LTD. The completed part is 15000 sqm (including 1000 sqm administrative offices).The building could be expanded by another 12,000 sqm to reach to 27,000 sqm.
The NF evaporators production of Konveyor started practically in 2005 with the technology developed in a subsidiary company. With the further capacity increases during 2006, Konveyor became one of the European players in NF as well.
In 2007, in the vicinity of the existing one there, another factory building (rented) of 4000 sqm was established in Eskisehir. Hence, the total manufacturing space in Eskisehir has reached to 16 000 sqm.
Konveyor today, with six the factories in the 3 different cities of Turkey and 1,300 employees in total, has reached an annual turnover volume of EUR 80 M, and has become a worldwide engineering company supplying various parts and components for all appliance manufacturers in Turkey, and for many others spread in Europa, Asia, Africa and South and North America
Konveyor works to continuously improve the performance in deliveries and services with a consistent quality level of the products that meets and exceeds customers requirements. All of the products and services are manufactured or carried out by the Konveyor's Quality System using DIN ISO 9001-2000.